| 1 |
Wear and enhancement of wear resistance – A review |
Neha Bhadauria, Sunil Pandey, P.M.Pandey |
Mechanical Engineering |
Materials today: Proceedings |
2019-20 |
2214-7853 |
https://www.sciencedirect.com/journal/materials-today-proceedings |
https://www.sciencedirect.com/science/article/pii/S2214785320313717#:~:text=The%20results%20suggested%20increase%20of,the%20particle%20content%20%5B8%5D. |
Scopus |
| 2 |
Improving surface hardness of aluminum 6063 alloy using hardfacing |
Shivank A.Tyagi, Neha Bhadauria, Prashant Vashishtha, Smriti Mishra |
Mechanical Engineering |
Materials today: Proceedings |
2019-20 |
2214-7853 |
https://www.sciencedirect.com/journal/materials-today-proceedings |
https://www.sciencedirect.com/science/article/pii/S2214785320310257?via%3Dihub |
Scopus |
| 3 |
Electrical Discharge Machining (EDM) of nickel-based nimonic alloys: A review |
Piyush Pant, Pushpendra S. Bharti |
Mechanical Engineering |
Materials Today: Proceedings |
2019-20 |
2214-7853 |
https://www.journals.elsevier.com/materials-today-proceedings |
https://www.sciencedirect.com/science/article/pii/S221478531933250X |
Scopus |
| 4 |
Influence of fillers and welding processes on the microstructural evolution, mechanical properties and corrosion behavior of dissimilar Hastelloy C-22/AISI 321 joints |
Sumitra Sharma, Ravindra V Taiwade, Abhishek Yadav, Himanshu Vashishtha |
Mechanical Engineering |
Materials Research Express |
2019-20 |
2053-1591 |
https://iopscience.iop.org/journal/2053-1591 |
https://iopscience.iop.org/article/10.1088/2053-1591/ab316b/meta |
SCI Impact Factor 1.929 |
| 5 |
Insight in applications, manufacturing and corrosion behaviour of magnesium and its alloys – A review |
Rupesh Chalisgaonkar |
Mechanical Engineering |
Materials today: Proceedings |
2019-20 |
2214-7853 |
https://www.journals.elsevier.com/materials-today-proceedings |
https://www.semanticscholar.org/paper/Insight-in-applications%2C-manufacturing-and-of-and-%E2%80%93-Chalisgaonkar/852341d7994248fdbca2135edefd3e196e26a046 |
Scopus |
| 6 |
Performance assessment of Dual Fuel Engine operated with agricultural waste and Diesel |
S Bhardwaj, A Sharma, A Malik, K L A Khan |
Mechanical Engineering |
Lecture notes in mechanical engineering |
2019-20 |
2195-4356 |
https://link.springer.com |
https://link.springer.com/chapter/10.1007/978-981-15-3746-2_21 |
SCOPUS |
| 7 |
Prediction of machining characteristics of finish cut WEDM process for pure titanium using feed forward back propagation neural network |
Rupesh Chalisgaonkar, Jatinder Kumar, Piyush Pant |
Mechanical Engineering |
Materials Today: Proceedings |
2019-20 |
2214-7853 |
https://www.journals.elsevier.com/materials-today-proceedings |
https://www.sciencedirect.com/science/article/pii/S2214785319324393 |
Scopus |
| 8 |
The process variation control in punching process by using dmaic approach for achieving six sigma level |
Dr. Anurag Gupta |
Mechanical Engineering |
INTERNATIONAL JOURNAL OF CREATIVE RESEARCH THOUGHTS |
2018-19 |
2320-2882 |
Journal IJCRT( ISSN: 2320-2882 ) International Peer Reviewed Journal and Refereed Journal, Follow ugc approved journal, UGC CARE, |
http://ijcrt.org/papers/IJCRT1812518.pdf |
listed in UGC approved journal
at the time of publication |
| 9 |
Analysis of Graphite reinforced Aluminium-6061 Metal Matrix Composite using Stir Casting Method |
Archana Kumari, Pratibha kumari |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_31.pdf |
UGC |
| 10 |
Analysis of load cell |
R Kumar, S Chhabra, AS Verma, A Gupta |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
Research India Publications was established in 1998 and now today we are one of the leading International Publishers (ripublication.com) |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_48.pdf |
listed in UGC approved journal
at the time of publication |
| 11 |
Bio-Diesel-An Alternate source of future |
Ashok kumar,Ajay Tyagi,Vineet Kumar Vashishtha |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_52.pdf |
listed in UGC approved journal
at the time of publication |
| 12 |
Carbonaceous Phase Change Nanocomposites: A low cost energy storage approach |
Apurv Yadav, Vineet Kumar Vashishtha, Harsha Yadav |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_33.pdf |
listed in UGC approved journal
at the time of publication |
| 13 |
Characterisation of Al6063/Alumina Nano Composite |
Neha Bhadauria, Prashant Vashishtha |
Mechanical Engineering |
International Journal for Research in Engineering Application & Management |
2018-19 |
2454-9150 |
https://www.ijream.org/ |
http://ijream.org/papers/IJREAMV04I033926.pdf |
UGC Care List |
| 14 |
Characterization of Jute and carbon fiber Hybrid FRP composite |
Dr. Anurag Gupta |
Mechanical Engineering |
International Journal of Technical Innovation in Modern Engineering & Science |
2018-19 |
2455-2585 |
http://ijtimes.com/ |
http://ijtimes.com/papers/finished_papers/150508010626.pdf |
listed in UGC approved journal
at the time of publication |
| 15 |
Comparative Investigation of Exhaust Emissions of Variable Compression Ratio Engine Utilizing Blends of Linseed Oil Biodiesels, Isopropyl Alcohol, Diethyl Ether with Standard Diesel |
Ajay Singh Verma; MM Hasan, Ashish Karnwal |
Mechanical Engineering |
World Scientific News |
2018-19 |
2392-2192 |
http://www.worldscientificnews.com/ |
http://www.worldscientificnews.com/wp-content/uploads/2018/09/WSN-113-2018-247-259-1.pdf |
Peer Reviewed |
| 16 |
Design of Upright Assembly for SUPRA Vehicle |
Ashish Kumar Singh, Tuhin Srivastava |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_58.pdf |
UGC |
| 17 |
Developing Thermal Model for Single Basin Double Slope Solar Desalination System |
Sandeep Chhabra, Ranjeet Kumar, Anurag Gupta, Ajay Singh Verma |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_55.pdf |
UGC |
| 18 |
Development of Mathematical Models for Bead Geometry of Al6061 surfaced using GTAW |
Prashant Vashishtha, Neha Bhadauria |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
IJAER, International Journal of Applied Engineering Research, Engineering Journals, Engineering Research Journal publisher in India, Mechanical Journals in India, Science Journal Publishers in India (ripublication.com) |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_41.pdf |
UGC Care List |
| 19 |
DIAGONOSIS OF REMAINING USEFUL LIFE ESTIMATION OF BALL BEARING USING ARTIFICIAL NEURAL NETWORK |
Kuldeep Singh, Somesh Agrawal, Piyush Pant |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
http://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_10.pdf |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_10.pdf |
UGC |
| 20 |
Effect of Natural Fibers as Fillers on Glass Fiber Reinforced Plastics |
Dr. Anurag Gupta |
Mechanical Engineering |
International Journal of Research in Advent Technology |
2018-19 |
2321-9637 |
IJRAT - International Journal of Research in Advent Technology |
https://1library.net/document/qvvl3grq-effect-natural-fibers-fillers-glass-fiber-reinforced-plastics.html |
listed in UGC approved journal
at the time of publication |
| 21 |
ENHANCING SUPPLY CHAIN OF HUMANITARIAN SUPPLY CHAIN MANAGEMENT - A Case study |
Somesh Agrawal, Kuldeep Singh |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_17.pdf |
UGC |
| 22 |
Execution of Reverse engineering- an ecologically responsive attitude smeared in OEM plants-Case Study |
Neeraj Kumar, Vipin |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_18.pdf |
UGC |
| 23 |
Experimental Investigation of temperature in Fins |
Sharma Subodh, Kumar Ajay, Kumari Pratibha |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_63.pdf |
UGC |
| 24 |
Experimental Wear behaviour of FeCrMoW hard faced coating
|
Kumari P., Kumari A., Sharma S. K. |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_32.pdf |
UGC |
| 25 |
Modeling of Elastic Properties of Particulate Composites |
A. Kumar, S. K. Singh, S. Sharma, A. Chandra |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-9769 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_46.pdf |
UGC |
| 26 |
Multi-Response Optimization of The Mechanical Properties of Pultruded Glass Fiber Composite Using Optimized Hybrid Filler Composition by The Gray Relation Grade analysis |
Anurag Gupta, Rahul Vaishya, K L A Khan, R S Walia and Hari Singh |
Mechanical Engineering |
Materials Research Express |
2018-19 |
2053-1591 |
Materials Research Express - IOPscience |
https://iopscience.iop.org/article/10.1088/2053-1591/ab56f2 |
SCIE |
| 27 |
Numerical Analysis of different blade profile of wind turbine |
Gaurav, Vipin, Raja Ram, Neeraj Kumar |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_67.pdf |
UGC |
| 28 |
OEE Enhancement Using TPM in Light Machine Shop: A case study |
Arunesh Chandra, Ajay Kumar, Yatender Chaturvedi |
Mechanical Engineering |
IJAER |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_34.pdf |
UGC |
| 29 |
Optimization of delamination factor in drilling of carbon fiber filled compression molded GFRP composite |
Anurag Gupta, Ajay Singh Verma, Sandeep Chhabra, Ranjeet Kumar |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_43.pdf |
UGC |
| 30 |
Optimization of Machining Parameters for Turning of ASTM A387 Alloy Steel on CNC Lathe Machine |
Dr. Anurag Gupta |
Mechanical Engineering |
International Journal of Technical Innovation in Modern Engineering & Science |
2018-19 |
2455-2585 |
http://ijtimes.com/ |
http://ijtimes.com/papers/finished_papers/150510224858.pdf |
listed in UGC approved journal
at the time of publication |
| 31 |
Optimization of parameters of GTAW for surfacing of AISI 304 |
Neha Bhadauria, Prashant Vashishtha, Smriti Mishra |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_40.pdf |
UGC Care List |
| 32 |
Performance characteristics of CI Engine fuelled Diethyl - Ether and its comparison with diesel fuelled CI engine |
Abhishek Yadav , Shwetabh Singh, Shivshankar Singh, Shubham Bishnoi, Tarun Goyal, Shashank Pandey
|
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_64.pdf |
UGC |
| 33 |
Reliability And Availability Analysis For A Manufacturing Network By Using Active Redundancy |
Smriti Mishra, Prashant Bhardwaj, Neha Bhadauria |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_19.pdf |
UGC Care List |
| 34 |
Study of the Recent Catalysts Utilized In Biofuels Production |
Ajay Singh Verma, Anurag Gupta, Ranjit Kumar, Sandeep Chhabra |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_54.pdf |
UGC |
| 35 |
Surface Hardness Enhancement of Al5083 Using TIG ARC |
Prashant Vashishtha, Neha Bhadauria |
Mechanical Engineering |
International Journal for Research in Engineering Application & Management |
2018-19 |
2454-9150 |
https://www.ijream.org/ |
http://ijream.org/papers/IJREAMV04I033924.pdf |
UGC Care List |
| 36 |
Thermal Analysis of Double Pipe Heat Exchanger |
Ashish Sharma, Ajay Tyagi, Ashok Kumar |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_53.pdf |
UGC |
| 37 |
Waste reduction by the assessment of reverse engineering attitude in gear production unit |
Neeraj Kumar, Anurag Bhargav |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_15.pdf |
UGC |
| 38 |
Wear Behaviour of FeCrMoW Hardfaced Coating |
Kumari Archana and Subodh Sharma Pratibha Kumari |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_32.pdf |
UGC |
| 39 |
Design & Fabrication of pneumatic powdered hacksaw |
Rupesh Chalisgaonkar, Ashutosh kumar Yadav, Abhishek Tyagi, , Ankur Jaiswal, Sandeep Kumar Singh |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2017-18 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_29.pdf |
UGC |
| 40 |
Effect of age Hardening and quenching media on Aluminium Foams |
K. L. A. Khan, G Kumar, R Prasad |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2017-18 |
0973-9769 |
https://www.ripublication.com |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_42.pdf |
UGC |
| 41 |
Effect of Process Parameters on MRR and Surface Roughness in Turning Operation using Taguchi Method |
Piyush Pant, Kunwar Laiq Ahmad Khan, Rupesh Chalisgaonkar and Shobhit Gupta |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2017-18 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
http://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_47.pdf |
UGC |
| 42 |
Experimental Investigation on Machining Characteristics of EN19 Alloy Steel Using CNC Vertical Machining Center |
Rupesh Chalisgaonkar, Ayush Rastogi |
Mechanical Engineering |
Journal of Experimental & Applied Mechanics |
2017-18 |
2321–516X |
http://stmjournals.com/Journal-of-Experimental-and-Applied-Mechanics.html |
http://engineeringjournals.stmjournals.in/index.php/JoEAM/article/view/1695 |
Peer Reviewed |
| 43 |
Impact of Loading and unloading strategy on Performance of a FMS at different level of routing flexibility |
Md. Mushid, A Rajvanshi, K.L.A.Khan |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2017-18 |
0973-9769 |
https://www.ripublication.com |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_36.pdf |
UGC |
| 44 |
Design and analysis of plastic moulding die and runner shape optimisation using AHP method. |
Rajesh Kumar Patel |
Mechanical Engineering |
International Journal of Advance Research in Engineering, Science & Technology |
2016-17 |
2350-0328 |
http://www.ijarset.com/ |
http://www.ijarest.com/papers/finished_papers/150723092255.pdf |
UGC |
| 45 |
Multi-response optimization using grey-fuzzy methodology for pure titanium in finish cut WEDM |
Rupesh Chalisgaonkar, Jatinder Kumar |
Mechanical Engineering |
International Journal of Advanced Mechatronics and Robotics |
2016-17 |
0975-6108 |
https://serialsjournals.com/index.php?route=product/product&product_id=330 |
https://pe.gndec.ac.in/sites/default/files/15-Rupesh%20Chalisgaonkar.pdf |
Peer Reviewed |
| 46 |
Nano-hierarchical Hydrophobic Structure of Polycarboante Fumed Silica Composites as a Thermal Barrier |
Neha Katiyar, Neha Bhadauria |
Mechanical Engineering |
International Journal of Engineering, Technology, Science and Research |
2016-17 |
2394-3386 |
http://www.ijetsr.com/ |
http://www.ijetsr.com/images/short_pdf/1471706792_IFUNA322_ijetsr.pdf |
Not listed in UGC |
| 47 |
Optimization of tensile strength of pultruded glass fiber composite |
Anurag Gupta,R.S walia, Hari singh |
Mechanical Engineering |
international journal of advance research in science and engineering |
2016-17 |
2319-8354 |
www.ijarse.com |
https://www.ijarse.com/images/fullpdf/1453103251_168I.pdf |
listed in UGC approved journal
at the time of publication |
| 48 |
Simultaneous Optimization of Multiple Performance Characteristics for Pure Titanium using multi-response signal-tonoise (MRSN) ratio in WEDM process |
Rupesh Chalisgaonkar, Jatinder Kumar |
Mechanical Engineering |
International Journal of Scientific & Engineering Research |
2016-17 |
2229-5518 |
https://www.ijser.org/ |
https://www.ijser.org/researchpaper/Simultaneous-Optimization-of-Multiple-Performance-Characteristics-for-Pure-Titanium-Using-multi-response-signal-to-noise-MRSN-ratio-in-WEDM-process.pdf |
Peer Reviewed |
| 49 |
The Effect of Variable Compression Ratio on Performance and Emission Characteristics of Diesel Engine Fuelled With Blends of Diethyl Ether, Linseed Oil Biodiesel and Diesel |
Ajay Singh Verma; MM Hasan, Ashish Karnwal, Vipul Vibhanshu |
Mechanical Engineering |
SAE Technical Paper |
2015-16 |
1487191 |
https://www.sae.org/publications/technical-papers/content/2015-24-2486/ |
https://www.sae.org/publications/technical-papers/content/2015-01-1936/ |
SCOPUS |
| 50 |
Experimental Investigation of Combustion and Exhaust Emission Characteristics of a Variable Compression Ratio Engine Using Isopropyl Alcohol (2-Propanol)-Diethyl Ether Blend with Diesel |
Ajay Singh Verma; MM Hasan, Ashish Karnwal, Vipul Vibhanshu |
Mechanical Engineering |
SAE Technical Paper |
2015-16 |
1487191 |
https://www.sae.org/publications/technical-papers/content/2015-01-1936/ |
https://www.sae.org/publications/technical-papers/content/2015-24-2486/ |
|
| 51 |
Implementation of Virtual Reality in the Conceptual Design of a Tractor Trailer |
A. Chandra, P. Chandna |
Mechanical Engineering |
Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering |
2015-16 |
2517-9950 |
https://panel.waset.org/journal/Mechanical |
https://www.researchgate.net/publication/271520786_Implementation_of_Virtual_Reality_in_the_Conceptual_Design_of_a_Tractor_Trailer |
UGC |
| 52 |
Investigation of the machining parameters and integrity of the work and wire surfaces after finish cut WEDM of commercially pure titanium |
Rupesh Chalisgaonkar, Jatinder Kumar |
Mechanical Engineering |
Journal of the Brazilian Society of Mechanical Sciences and Engineering |
2015-16 |
1806-3691 |
https://www.springer.com/journal/40430/ |
https://link.springer.com/article/10.1007%2Fs40430-015-0335-3 |
SCI |
| 53 |
Investigation of wire consumption and wear mechanism in trim cut WEDM operation of commercially pure titanium |
Rupesh Chalisgaonkar, Jatinder Kumar |
Mechanical Engineering |
Materials Science Forum |
2015-16 |
1662-9752 |
https://www.scientific.net/MSF |
https://www.scientific.net/MSF.808.43 |
Scopus |
| 54 |
Stature Prediction Model Based on Hand Anthropometry |
A. Chandra, P. Chandna, S. Deswal, R. Mishra, R. Kumar |
Mechanical Engineering |
International Journal of Medical, Health, Biomedical and Pharmaceutical Engineering |
2015-16 |
10001129 |
https://panel.waset.org/journal/Medical |
https://www.researchgate.net/publication/275897094_Stature_Prediction_Model_Based_On_Hand_Anthropometry |
UGC |
| 55 |
Study on application of waste plastic in the construction industry |
Abhishek Yadav, Arunesh Chandra, Shwetabh singh |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.743 |
https://drive.google.com/file/d/1MVJh_vw1Tcz8-xtMaBrapGRAPir1j8wq/view?usp=sharing |
Scopus |
| 56 |
A review on performance, combustion and emissions utilizing alternative fuels |
Ajay Singh Verma, Sandeep Chhabra, Ashish Karnwal, Anurag Gupta, Ranjeet Kumar |
Mechanical Engineering |
Materials Today Proceedings |
2022-23 |
22147853 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
https://www.sciencedirect.com/science/article/pii/S2214785322029480 |
|
| 57 |
Study of utilization of hydrogen as fuel in internal combustion engine |
Aman Aggarwal, Suyash Yadav, Kshitij Singh, Ajay Singh Verma, Sandeep Chhabra |
Mechanical Engineering |
Materials Today Proceedings |
2022-23 |
22147853 |
https://doi.org/10.1016/j.matpr.2022.03.660 |
https://www.sciencedirect.com/science/article/pii/S2214785322020089 |
|
| 58 |
Effect of drilling process parameters on delamination factor in drilling of pultruded glass fiber reinforced polymer composite |
Anurag Gupta,Rahul Vaishya,Ranjeet Kumar, K.L.A.Khan,Sandeep Chhabra,Ajay Singh Verma,Abhay Bharadwa |
Mechanical Engineering |
Materials Today Proceedings |
2022-23 |
22147853 |
https://doi.org/10.1016/j.matpr.2022.04.110 |
https://www.sciencedirect.com/science/article/pii/S2214785322022519 |
|
| 59 |
Effect of drilling process parameters on delamination factor in drilling of pultruded glass fiber reinforced polymer composite |
Anurag Gupta,
Rahul Vaishya, Ranjeet Kumar, K.L.A.Khan, SandeepChhabra, jay Singh Verma, Abhay
Bha |
Mechanical Engineering |
MaterialsToday: Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.110 |
https://drive.google.com/file/d/1_8a8aLiQORil7xDWhdU_NM_59AFM9yT0/view?usp=sharing |
SCOPUS |
| 60 |
Characterization of wear of FRP composites: A review |
PrathuSingh,SalilSingh, Rudresh Ojha,Pratik Tiwari, Shahib Khan,Ranjeet Kumar, Anurag Gupta |
Mechanical Engineering |
MaterialsToday: Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.236 |
https://drive.google.com/file/d/1vpYp8c6lYZAFzkIFWB8cLQyyEt8b21cP/view?usp=sharing |
SCOPUS |
| 61 |
A review of fatigue behavior of FRP composites |
Shrey Arora, Rupesh Chitkara,Ayush Singh, Dhangar Divyanshu Dubey, Ranjeet Kumar, AnuragGupta |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.034 |
https://drive.google.com/file/d/13FWIpS9P8EyduqLUAbJxJTYCzYSO90sj/view?usp=sharing |
SCOPUS |
| 62 |
Effect on the mechanical properties due to hybridization of banana-fiber composites: A review |
RanjeetKumar, Anurag Gupta, K.L.A.Khan |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.436 |
https://drive.google.com/file/d/1c2v3XluDU0wQBu2hi9T1LoMR718FfONF/view?usp=sharing |
SCOPUS |
| 63 |
A review on performance, combustion and emissions utilizing alternative fuels |
Ajay Singh Verma, SandeepChhabra, Ashish Karnwal, Anurag Gupta, Ranjeet Kumar |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
https://drive.google.com/file/d/1x89j8gOWkROradYo6yn3KHjemTpFtNgE/view?usp=sharing |
SCOPUS |
| 64 |
Parametric optimization of traveling wire electrochemical discharge machining (TW-ECDM) process for aspect ratio during machining of borosilicate glass |
ManojKumar,R.O.Vaishya, N.M.Suri,Anurag Gupta |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2021-22 |
1210-1214 |
https://doi.org/10.1016/j.matpr.2022.03.599 |
https://drive.google.com/file/d/1NB1AjjOv6E_Wnw0iS-ZGmAKQWeD0qGdC/view?usp=sharing |
SCOPUS |
| 65 |
Bioinspired hydrophobic surfaces: An overview |
Navdeep Singh Bains,Rahul O.Vaishya, Suman Kant, Anurag Gupta |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.901 |
https://drive.google.com/file/d/1UX2MStHkvRsr6XzRU7SJpasVRddvx7y_/view?usp=sharing |
SCOPUS |
| 66 |
A review on performance, combustion and emissions utilizing
alternative fuels |
Ajay Singh Verma , Sandeep Chhabra, Ashish Karnwal, Anurag Gupta, Ranjeet Kumar |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
https://drive.google.com/file/d/10UeqLwRxZIgxGn-ebWFVlhwghwgGaLfh/view?usp=sharing |
Scopus |
| 67 |
A review on performance, combustion and emissions utilizing
alternative fuels |
Ajay Singh Verma , Sandeep Chhabra, Ashish Karnwal, Anurag Gupta, Ranjeet Kumar |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
https://drive.google.com/file/d/10UeqLwRxZIgxGn-ebWFVlhwghwgGaLfh/view?usp=sharing |
Scopus |
| 68 |
A review of the performance and effluent characteristics of diesel engine
fueled with different biodiesel |
Akhil Malik, Abhishikt Sinha , Akshat Bhardwaj, Chirag Chauhan, Akash Yadav, Ashish Karnwal, Ashish |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7854 |
https://doi.org/10.1016/j.matpr.2022.04.204 |
https://drive.google.com/file/d/1N7VXCMZamyJEH-k3Zhq6EVFkOYsa5VyI/view?usp=sharing |
Scopus |
| 69 |
Attempts to raise the solar still outcome: A short review |
Sandeep Chhabra , Ajay Singh Verma , Anurag Gupta , Ranjeet Kumar , Ashish Karnwal , Ashok Kumar , V |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7855 |
https://doi.org/10.1016/j.matpr.2022.04.477 |
https://drive.google.com/file/d/1-6kniPo8cSGRt2TOHcR_iN5NwT_D7MeF/view?usp=sharing |
Scopus |
| 70 |
A short review of the effect of plunge depth on friction stir welding of aluminium pipes |
Ashish Sharma, Zahid A Khan, Arshad Noor Siddiquee |
Mechanical Engineering |
MATERIALSTODAYPROCEEDINGS |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.05.257 |
https://drive.google.com/file/d/1NHLrNetluCne76lpYhcbUSIffq_xdqCW/view?usp=sharing |
SCOPUS |
| 71 |
Review of various methods of keyhole removal in friction stir welding sheets and pipes |
Ashish Sharma, Zahid A Khan, Arshad Noor Siddiquee |
Mechanical Engineering |
MATERIALSTODAYPROCEEDINGS |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.883 |
https://drive.google.com/file/d/1TO-oULl5uUq3Z8EtJJVDH0pP2_LeFlML/view?usp=sharing |
SCOPUS |
| 72 |
An overview of software tools for the photovoltaic industry |
Vineet Kumar Vashishtha,, Apurv Yadav,, Ashok Kumar, Vinod Kumar Shukla |
Mechanical Engineering |
Materials Today Proceedings |
2021-22 |
|
https://doi.org/10.1016/j.matpr.2022.04.737 |
https://drive.google.com/drive/folders/1btrUCUbOai3dB51cdu6RINoUltP7e5fS?usp=sharing |
SCOPUS |
| 73 |
Feasibility study of vertical axis wind turbine on UAE highways |
Apurv Yadav, Swaroop Ramaswamy Pillai, Vineet Kumar Vashishtha, Ashok Kumar |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
|
https://doi.org/10.1016/j.matpr.2022.04.523 |
https://drive.google.com/drive/folders/1btrUCUbOai3dB51cdu6RINoUltP7e5fS?usp=sharing |
SCOPUS |
| 74 |
Recrystallisation, concurrent precipitation, and texture
development in Cold Forged Mg-6Al-3Sn magnesium alloy, |
Gaurav, Purnashis Chakraboraty;Vikrant Tiwari |
Mechanical Engineering |
Canadian Metallurgical Quarterly; |
2022-23 |
Print ISSN: 0008-4433 Online ISSN: 1879-1395 |
Not issued |
https://drive.google.com/file/d/1_qAtMSV5er4FP-yX6yB-BmKFD7oBGmjW/view?usp=sharing |
SCI |
| 75 |
Variants of TIG welding process for improvement of weld penetration
depth - A review |
Gaurav Sharma, Rohan Tyagi, Priyanshu, Pratishtha Sharma |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322024087 |
https://drive.google.com/file/d/1646pSZe5Slk0z0t9jboshm--LrBrr0NM/view?usp=sharing |
Scopus |
| 76 |
Recent development in the field of wind turbine |
Vidit Sharma, Sonendra Sharma, Gaurav Sharma |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322037798 |
https://drive.google.com/file/d/1Ll3jz8KnzGUySBSntp3udLwtUIu5oF-a/view?usp=sharing |
Scopus |
| 77 |
Machine Learning Regression Approaches for Prediction Microhardness of Al-Y2O3 Composite |
Sachin Rathore, Ratnesh Kumar Raj Singh, K.L.A. Khan |
Mechanical Engineering |
International Journal of Engineering Trends and Technology Volume 70 Issue 4, 303-315, April 2022 |
2021-22 |
ISSN: 2231 – 5381 |
https://doi.org/10.14445/22315381/IJETT-V70I4P227 |
https://drive.google.com/file/d/1n5O24O7quqp3CpoABpz6TDxKjLyR6VfZ/view?usp=sharing |
SCOPUS |
| 78 |
Modelling of Indian vendors posture using rapid upper limb assessment (RULA) |
S. Rathore, K.L.A. Khan, A.P. Agrawal, R. Chalisgaonkar, |
Mechanical Engineering |
Materials Today Proceedings (Elsevier) |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.03.712 |
https://drive.google.com/file/d/1WC3U4ofeXlywjNdUZAQm6bLdTJBhLGR4/view?usp=sharing |
SCOPUS |
| 79 |
Effect of drilling process parameters on delamination factor in drilling of pultruded glass fiber reinforced polymer composite |
Anurag Gupta Rahul Vaishya, Ranjeet Kumar, K.L.A.Khan, SandeepChhabraAjay Singh Verma, AbhayBhara |
Mechanical Engineering |
MaterialsToday: Proceedings |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.110 |
https://drive.google.com/file/d/1_8a8aLiQORil7xDWhdU_NM_59AFM9yT0/view?usp=sharing |
SCOPUS |
| 80 |
Effect on the mechanical properties due to hybridization of banana-fiber composites: A review |
Ranjeet Kumar Anurag Gupta K.L.A.Khan, |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.436 |
https://drive.google.com/file/d/1gRW69MGr35Ty0IeQZFrXvk3Sen7XnBPg/view?usp=sharing |
SCOPUS |
| 81 |
Multi response assessment of EN19 alloy steel in CNC milling process using Fuzzy matter element methodology |
R. Chalisgaonkar, V. Agrawal, S. Rathore and K.L.A. Khan |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.03.713 |
https://drive.google.com/file/d/1J088CMjTf8SrUgpeg_o7ogFG_NyZKlyn/view?usp=sharing |
SCOPUS |
| 82 |
A concept for removing the pollutants from air |
D. Deepak Singh, A. Mohan, A. Walia, D. Choudhary and K L A Khan |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
2214-7853 |
https://drive.google.com/file/d/1h_Nq0VhdJruvGfM18dLHJ8zf9khybTyg/view?usp=sharing |
https://drive.google.com/file/d/1h_Nq0VhdJruvGfM18dLHJ8zf9khybTyg/view?usp=sharing |
SCOPUS |
| 83 |
Review of bio-fuel and nano-particles as an additive in diesel fuelled engine |
Govind Sharma, Subodh Kumar Sharma, KV Ojha |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
|
https://doi.org/10.1016/j.matpr.2022.04.307 |
https://drive.google.com/file/d/1qnPZN54_kM8RBtV7K-QaXLh3VwzEbS4P/view?usp=sharing |
|
| 84 |
Modelling of gas field formation in atomization casting |
KrishnaVijay Ojha, SubodhKumar Sharma,Neeraj Kumar, PratibhaKumari, Kumari, Archana |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
|
https://doi.org/10.1016/j.matpr.2022.05.458 |
https://drive.google.com/file/d/18J1s51n0PESm3U5UIjqnQdyVgeeq3qUL/view?usp=sharing |
|
| 85 |
Analysis of supply chain: An application of Taguchi method |
V.K.Pathak R.K.Patel N.Kumar |
Mechanical Engineering |
materials today proceeding |
2022-23 |
|
|
|
|
| 86 |
Modelling of gas field formation in atomization casting |
Krishna Vijay Ojha, Subodh Kumar Sharma, Neeraj Kumar, Pratibha Kumari, Kumari Archana |
Mechanical Engineering |
materials today proceeding |
2021-22 |
|
|
|
|
| 87 |
Fabrication of aluminium MMCs & associated difficulties–A review |
Neha Bhadauria, Prashant Vashishtha, Smriti Mishra, Prashant Bhardwaj |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322022465 |
https://drive.google.com/file/d/1yMsNew3xcRy4kuhGbud-fNnMGsSm3CtM/view?usp=sharing |
Scopus |
| 88 |
Influence of process parameters of friction stir processing on the fabrication of metal foam |
Smriti Mishra, Prashant Bhardwaj, Neha Bhadauria, Prashant Vashishtha |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322027419 |
https://drive.google.com/file/d/1ixCSWb0T2yh8B0vsEZfe7tGhTWNRJaK0/view?usp=sharing |
Scopus |
| 89 |
Problems encountered in underwater welding and remedies- a review |
Prashant Vashishtha, Reeta Wattal, Sunil Pandey, Neha Bhadauria |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S221478532202795X |
https://drive.google.com/file/d/1b1L-__xiOzg_ESfoVshDUVhKPtrojT93/view?usp=sharing |
Scopus |
| 90 |
Fabrication of aluminium MMCs & associated difficulties–A review |
Neha Bhadauria, Prashant Vashishtha, Smriti Mishra, Prashant Bhardwaj |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322022465 |
https://drive.google.com/file/d/1yMsNew3xcRy4kuhGbud-fNnMGsSm3CtM/view?usp=sharing |
Scopus |
| 91 |
Influence of process parameters of friction stir processing on the fabrication of metal foam |
Smriti Mishra, Prashant Bhardwaj, Neha Bhadauria, Prashant Vashishtha |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322027419 |
https://drive.google.com/file/d/1ixCSWb0T2yh8B0vsEZfe7tGhTWNRJaK0/view?usp=sharing |
Scopus |
| 92 |
Problems encountered in underwater welding and remedies- a review |
Prashant Vashishtha, Reeta Wattal, Sunil Pandey, Neha Bhadauria |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S221478532202795X |
https://drive.google.com/file/d/1b1L-__xiOzg_ESfoVshDUVhKPtrojT93/view?usp=sharing |
Scopus |
| 93 |
Analysis of supply chain: An application of Taguchi method |
V.K.Pathak, R.K.Patel, N.Kumar |
Mechanical Engineering |
materials today proceeding |
2022-23 |
|
|
|
|
| 94 |
Effect on the mechanical properties due to hybridization of banana-fiber composites: A review |
Ranjeet Kumar, Anurag Gupta, K.L.A.Khan |
Mechanical Engineering |
MaterialsToday
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.436 |
https://drive.google.com/file/d/1c2v3XluDU0wQBu2hi9T1LoMR718FfONF/view?usp=sharing |
SCOPUS |
| 95 |
Effect of drilling process parameters on delamination factor in drilling of pultruded glass fiber reinforced polymer composite |
Anurag Gupta, Rahul Vaishya, Ranjeet Kumar, K.L.A.Khan, Sandeep Chhabra, Ajay Singh Verma, Abhay Bha |
Mechanical Engineering |
MaterialsToday
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.110 |
https://drive.google.com/file/d/1_8a8aLiQORil7xDWhdU_NM_59AFM9yT0/view?usp=sharing |
SCOPUS |
| 96 |
Characterization of wear of FRP composites: A review |
Prathu Singh,Salil Singh, Rudresh Ojha, Pratik Tiwari, Shahib Khan, Ranjeet Kumar, Anurag Gupta |
Mechanical Engineering |
MaterialsToday
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.236 |
https://drive.google.com/file/d/1vpYp8c6lYZAFzkIFWB8cLQyyEt8b21cP/view?usp=sharing |
SCOPUS |
| 97 |
A review of fatigue behavior of FRP composites |
Shrey Arora, Rupesh Chitkara, Ayush Singh, Dhangar Divyanshu Dubey, Ranjeet Kumar, Anurag Gupta |
Mechanical Engineering |
MaterialsToday
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.034 |
https://drive.google.com/file/d/13FWIpS9P8EyduqLUAbJxJTYCzYSO90sj/view?usp=sharing |
SCOPUS |
| 98 |
A review on performance, combustion and emissions utilizing alternative fuels |
Ajay Singh Verma, Sandeep Chhabra, Ashish Karnwal, Anurag Gupta, Ranjeet Kumar |
Mechanical Engineering |
MaterialsToday
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
https://drive.google.com/file/d/1x89j8gOWkROradYo6yn3KHjemTpFtNgE/view?usp=sharing |
SCOPUS |
| 99 |
Investigation of different parameters of cube printed using PLA by FDM 3D printer |
Shreesh Maurya,Bharatveer Malik, Praduman Sharma,Ajay Singh, Rupesh Chalisgaonkar |
Mechanical Engineering |
Materials Today Proceedings |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.03.700 |
https://drive.google.com/file/d/1nDKItlfy0-oXWb2FE7d3FIWa3pZDrCl3/view?usp=sharing |
SCOPUS |
| 100 |
Modelling of Indian vendors posture using rapid upper limb assessment (RULA) |
SachinRathore, K.L.A.Khan, Anant Prakash Agrawal, Rupesh Chalisgaonkar, Ratnesh Kr.Raj Singh, Malay |
Mechanical Engineering |
Materials Today Proceedings |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.03.712 |
https://drive.google.com/file/d/1Wma3cUyv0bEVnULz__QLMPu2TZohU_ad/view?usp=sharing |
SCOPUS |
| 101 |
Machine Learning Regression Approaches for Prediction Microhardness of Al-Y2O3 Composite |
Sachin Rathore, Ratnesh Kumar Raj Singh, K.L.A. Khan |
Mechanical Engineering |
International Journal of Engineering Trends and Technology Volume 70 Issue 4, 303-315, April 2022 |
2021-22 |
ISSN: 2231 – 5381 |
https://doi.org/10.14445/22315381/IJETT-V70I4P227 |
https://drive.google.com/file/d/1n5O24O7quqp3CpoABpz6TDxKjLyR6VfZ/view?usp=sharing |
SCOPUS |
| 102 |
Effect of drilling process parameters on delamination factor in drilling of pultruded glass fiber reinforced polymer composite |
Anurag Gupta,
Rahul Vaishya, Ranjeet Kumar, K.L.A.Khan, SandeepChhabra, jay Singh Verma, Abhay
Bha |
Mechanical Engineering |
MaterialsToday: Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.110 |
https://drive.google.com/file/d/1_8a8aLiQORil7xDWhdU_NM_59AFM9yT0/view?usp=sharing |
SCOPUS |
| 103 |
A review on performance, combustion and emissions utilizing alternative fuels |
Ajay Singh Verma, Sandeep Chhabra, Ashish Karnwal, Anurag Gupta, Ranjeet Kumar |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
https://drive.google.com/file/d/1x89j8gOWkROradYo6yn3KHjemTpFtNgE/view?usp=sharing |
SCOPUS |
| 104 |
Parametric optimization of traveling wire electrochemical discharge machining (TW-ECDM) process for aspect ratio during machining of borosilicate glass |
ManojKumar,R.O.Vaishya, N.M.Suri,Anurag Gupta |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2021-22 |
1210-1214 |
https://doi.org/10.1016/j.matpr.2022.03.599 |
https://drive.google.com/file/d/1NB1AjjOv6E_Wnw0iS-ZGmAKQWeD0qGdC/view?usp=sharing |
SCOPUS |
| 105 |
Study of utilization of hydrogen as fuel in internal combustion engine |
Aman Aggarwal, Suyash Yadav, Kshitij Singh, Ajay Singh Verma, Sandeep Chhabra |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.03.660 |
https://drive.google.com/file/d/19mYtxbJvgGuG3--lk7uhwPGwFZ8Gq1sW/view?usp=sharing |
SCOPUS |
| 106 |
Influence of process parameters of friction stir processing on the fabrication of metal foam |
Smriti Mishra, Prashant Bhardwaj, Neha Bhadauria, Prashant Vashishtha |
Mechanical Engineering |
Materials today proceedings |
2021-22 |
2214-7853 |
Influence of process parameters of friction stir processing on the fabrication of metal foam - ScienceDirect |
Influence of process parameters of friction stir processing on the fabrication of metal foam - ScienceDirect |
scopus |
| 107 |
Fabrication Of Aluminium MMCs & assosiated difficulties-A Review |
Neha Bhadauria, Prashant Vashishtha,Smriti Mishra, Prashant Bhardwaj, |
Mechanical Engineering |
Materials today proceedings |
2021-22 |
2214-7853 |
Fabrication of aluminium MMCs & associated difficulties – A review - ScienceDirect |
Fabrication of aluminium MMCs & associated difficulties – A review - ScienceDirect |
scopus |
| 108 |
A REVIEW: SMART AGRICULTURE SYSTEM USING IOT |
Sudhir Yadav*1, Sumit Umrao*2, Yash Bhardwaj*3, Aviral Srivastava*4, Aditya Shukla*5, Subodh Kumar S |
Mechanical Engineering |
International Research Journal of Modernization in Engineering Technology and Science |
2021-22 |
2582-5208 |
|
https://drive.google.com/file/d/1r0LLQS8hPCVl33HUQkGye-f9PmzTiYXw/view?usp=sharing |
|
| 109 |
Methods to enhance the productivity of solar still: A review |
Vineet Kumar Vashishtha, Anil Kumar, Amit Pal |
Mechanical Engineering |
Materials Today Proceedings |
2021-22 |
|
https://doi.org/10.1016/j.matpr.2022.04.022 |
https://drive.google.com/drive/folders/1btrUCUbOai3dB51cdu6RINoUltP7e5fS?usp=sharing |
SCOPUS |
| 110 |
Comparative analysis of different barriers in downstream supply chain |
Nishant Chaudhary, Aditya Srivastava, Aditya Dhar Dubey, Rahul Kumar Verma, Abhishek Yadav, Vivek KumarPathak |
Mechanical Engineering |
materials today proceeding |
2021-22 |
|
https://doi.org/10.1016/j.matpr.2022.05.462 |
https://doi.org/10.1016/j.matpr.2022.05.462 |
scopus |
| 111 |
Analysis of supply chain: An application of Taguchi method |
V.K.Pathak, R.K.Patel, N.Kumar |
Mechanical Engineering |
materials today proceeding |
2022-23 |
|
|
|
|
| 112 |
Study on application of waste plastic in the construction industry |
Abhishek Yadav |
Mechanical Engineering |
Materials Today: Proceedings |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.743 |
https://doi.org/10.1016/j.matpr.2022.04.743 |
Scopus |
| 113 |
A review on performance, combustion and emissions utilizing alternative fuels |
Ajay Singh Verma |
Mechanical Engineering |
Materials Today Proceedings |
2022-23 |
22147853 |
https://www.sciencedirect.com/science/article/pii/S2214785322029480 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
#### |
| 114 |
Study of utilization of hydrogen as fuel in internal combustion engine |
Ajay Singh Verma |
Mechanical Engineering |
Materials Today Proceedings |
2022-23 |
22147853 |
https://www.sciencedirect.com/science/article/pii/S2214785322020089 |
https://doi.org/10.1016/j.matpr.2022.03.660 |
#### |
| 115 |
Effect of drilling process parameters on delamination factor in drilling of pultruded glass fiber reinforced polymer composite |
Ajay Singh Verma |
Mechanical Engineering |
Materials Today Proceedings |
2022-23 |
22147853 |
https://www.sciencedirect.com/science/article/pii/S2214785322022519 |
https://doi.org/10.1016/j.matpr.2022.04.110 |
#### |
| 116 |
CFD investigation of a cooling of heated cylinder placed on a flat surface |
Ankur Sachdeva |
Mechanical Engineering |
Journal of Materials Today Proceedings |
2022-23 |
22147853 |
https://www.sciencedirect.com/journal/materials-today-proceedings |
https://doi.org/10.1016/j.matpr.2022.06.364 |
Scopus |
| 117 |
Effect of drilling process parameters on delamination factor in drilling of pultruded glass fiber reinforced polymer composite |
Anurag Gupta |
Mechanical Engineering |
MaterialsToday: Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322022519 |
https://doi.org/10.1016/j.matpr.2022.04.110 |
SCOPUS |
| 118 |
Characterization of wear of FRP composites: A review |
Anurag Gupta |
Mechanical Engineering |
MaterialsToday: Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322023689 |
https://doi.org/10.1016/j.matpr.2022.04.236 |
SCOPUS |
| 119 |
A review of fatigue behavior of FRP composites |
Anurag Gupta |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322021587 |
https://doi.org/10.1016/j.matpr.2022.04.034 |
SCOPUS |
| 120 |
Effect on the mechanical properties due to hybridization of banana-fiber composites: A review |
Anurag Gupta |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322025810 |
https://doi.org/10.1016/j.matpr.2022.04.436 |
SCOPUS |
| 121 |
A review on performance, combustion and emissions utilizing alternative fuels |
Anurag Gupta |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322029480 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
SCOPUS |
| 122 |
Attempts to raise the solar still outcome: A short review |
Anurag Gupta |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322022519 |
https://doi.org/10.1016/j.matpr.2022.04.477 |
SCOPUS |
| 123 |
Parametric optimization of traveling wire electrochemical discharge machining (TW-ECDM) process for aspect ratio during machining of borosilicate glass |
Anurag Gupta |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
1210-1214 |
https://www.sciencedirect.com/science/article/pii/S2214785322019496 |
https://doi.org/10.1016/j.matpr.2022.03.599 |
SCOPUS |
| 124 |
Bioinspired hydrophobic surfaces: An overview |
Anurag Gupta |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322030802 |
https://doi.org/10.1016/j.matpr.2022.04.901 |
SCOPUS |
| 125 |
Study on application of waste plastic in the construction industry |
Arunesh Chandra |
Mechanical Engineering |
Materials Today |
2022-23 |
2214-7853 |
https://journalinsights.elsevier.com/journals/2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.743 |
Scopus |
| 126 |
A review on performance, combustion and emissions utilizing
alternative fuels |
Dr. Ashish Karnwal |
Mechanical Engineering |
Materials Today: Proceedings |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
Scopus |
| 127 |
A review on performance, combustion and emissions utilizing
alternative fuels |
Dr. Ashish Karnwal |
Mechanical Engineering |
Materials Today: Proceedings |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
Scopus |
| 128 |
A review of the performance and effluent characteristics of diesel engine
fueled with different biodiesel |
Dr. Ashish Karnwal |
Mechanical Engineering |
Materials Today: Proceedings |
2022-23 |
2214-7854 |
https://doi.org/10.1016/j.matpr.2022.04.204 |
https://doi.org/10.1016/j.matpr.2022.04.204 |
Scopus |
| 129 |
Attempts to raise the solar still outcome: A short review |
Dr. Ashish Karnwal |
Mechanical Engineering |
Materials Today: Proceedings |
2022-23 |
2214-7855 |
https://doi.org/10.1016/j.matpr.2022.04.477 |
https://doi.org/10.1016/j.matpr.2022.04.477 |
Scopus |
| 130 |
A short review of the effect of plunge depth on friction stir welding of aluminium pipes |
ASHISH SHARMA |
Mechanical Engineering |
MATERIALSTODAYPROCEEDINGS |
2022-23 |
2214-7853 |
https://www.journals.elsevier.com/materials-today-proceedings |
https://doi.org/10.1016/j.matpr.2022.05.257 |
SCOPUS |
| 131 |
Review of various methods of keyhole removal in friction stir welding sheets and pipes |
ASHISH SHARMA |
Mechanical Engineering |
MATERIALSTODAYPROCEEDINGS |
2022-23 |
2214-7853 |
https://www.journals.elsevier.com/materials-today-proceedings |
https://doi.org/10.1016/j.matpr.2022.04.883 |
SCOPUS |
| 132 |
An overview of software tools for the photovoltaic industry |
ASHOK KUMAR |
Mechanical Engineering |
Elesivier |
2022-23 |
#### |
https://www.sciencedirect.com/science/article/pii/S2214785322029066 |
https://doi.org/10.1016/j.matpr.2022.04.737 |
SCOPUS |
| 133 |
Attempts to raise the solar still outcome: A short review |
ASHOK KUMAR |
Mechanical Engineering |
Elesivier |
2022-23 |
#### |
https://www.sciencedirect.com/science/article/pii/S2214785322026657 |
https://doi.org/10.1016/j.matpr.2022.04.477 |
SCOPUS |
| 134 |
Feasibility study of vertical axis wind turbine on UAE highways |
ASHOK KUMAR |
Mechanical Engineering |
Elesivier |
2022-23 |
#### |
https://www.sciencedirect.com/science/article/pii/S221478532202689X |
https://doi.org/10.1016/j.matpr.2022.04.523 |
SCOPUS |
| 135 |
Recrystallisation, concurrent precipitation, and texture
development in Cold Forged Mg-6Al-3Sn magnesium alloy, |
Gaurav |
Mechanical Engineering |
Canadian Metallurgical Quarterly; |
2022-23 |
Print ISSN: 0008-4433 Online ISSN: 1879-1395 |
https://www.tandfonline.com/action/journalInformation?journalCode=ycmq20 |
Not issued |
SCI |
| 136 |
Variants of TIG welding process for improvement of weld penetration
depth - A review |
Gaurav Sharma |
Mechanical Engineering |
Materials Today: Proceedings |
2022-23 |
2214-7853 |
https://www.journals.elsevier.com/materials-today-proceedings |
https://www.sciencedirect.com/science/article/pii/S2214785322024087 |
Scopus |
| 137 |
Recent development in the field of wind turbine |
Gaurav Sharma |
Mechanical Engineering |
Materials Today: Proceedings |
2022-23 |
2214-7853 |
https://www.journals.elsevier.com/materials-today-proceedings |
https://www.sciencedirect.com/science/article/pii/S2214785322037798 |
Scopus |
| 138 |
Machine Learning Regression Approaches for Prediction Microhardness of Al-Y2O3 Composite |
Dr K L A Khan |
Mechanical Engineering |
International Journal of Engineering Trends and Technology Volume 70 Issue 4, 303-315, April 2022 |
2022-23 |
ISSN: 2231 – 5381 |
https://doi.org/10.14445/22315381/IJETT-V70I4P227 |
https://doi.org/10.14445/22315381/IJETT-V70I4P227 |
SCOPUS |
| 139 |
Modelling of Indian vendors posture using rapid upper limb assessment (RULA) |
Dr K L A Khan |
Mechanical Engineering |
Materials Today Proceedings (Elsevier) |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322021101 |
https://doi.org/10.1016/j.matpr.2022.03.712 |
SCOPUS |
| 140 |
Effect of drilling process parameters on delamination factor in drilling of pultruded glass fiber reinforced polymer composite |
Dr K L A Khan |
Mechanical Engineering |
MaterialsToday: Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322022519 |
https://doi.org/10.1016/j.matpr.2022.04.110 |
SCOPUS |
| 141 |
Effect on the mechanical properties due to hybridization of banana-fiber composites: A review |
Dr K L A Khan |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322025810 |
https://doi.org/10.1016/j.matpr.2022.04.436 |
SCOPUS |
| 142 |
Multi response assessment of EN19 alloy steel in CNC milling process using Fuzzy matter element methodology |
Dr K L A Khan |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322025810 |
https://doi.org/10.1016/j.matpr.2022.03.713 |
SCOPUS |
| 143 |
A concept for removing the pollutants from air |
Dr K L A Khan |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322025810 |
https://drive.google.com/file/d/1h_Nq0VhdJruvGfM18dLHJ8zf9khybTyg/view?usp=sharing |
SCOPUS |
| 144 |
Review of bio-fuel and nano-particles as an additive in diesel fuelled engine |
Dr. K. V. Ojha |
Mechanical Engineering |
Materials Today: Proceedings |
2022-23 |
#### |
https://www.sciencedirect.com/science/article/pii/S221478532202449X |
https://doi.org/10.1016/j.matpr.2022.04.307 |
#### |
| 145 |
Modelling of gas field formation in atomization casting |
Dr. K. V. Ojha |
Mechanical Engineering |
Materials Today: Proceedings |
2022-23 |
#### |
https://www.sciencedirect.com/science/article/pii/S2214785322037786 |
https://doi.org/10.1016/j.matpr.2022.05.458 |
#### |
| 146 |
Analysis of supply chain: An application of Taguchi method |
Neeraj Kumar |
Mechanical Engineering |
materials today proceeding |
2022-23 |
#### |
https://doi.org/10.1016/j.matpr.2022.06.266 |
#### |
#### |
| 147 |
Modelling of gas field formation in atomization casting |
Neeraj Kumar |
Mechanical Engineering |
materials today proceeding |
2022-23 |
#### |
https://doi.org/10.1016/j.matpr.2022.05.458 |
#### |
#### |
| 148 |
Fabrication of aluminium MMCs & associated difficulties–A review |
Neha Bhadauria |
Mechanical Engineering |
Materials Today: Proceedings |
2022-23 |
2214-7853 |
https://journalinsights.elsevier.com/journals/2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322022465 |
Scopus |
| 149 |
Influence of process parameters of friction stir processing on the fabrication of metal foam |
Neha Bhadauria |
Mechanical Engineering |
Materials Today: Proceedings |
2022-23 |
2214-7853 |
https://journalinsights.elsevier.com/journals/2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322027419 |
Scopus |
| 150 |
Problems encountered in underwater welding and remedies- a review |
Neha Bhadauria |
Mechanical Engineering |
Materials Today: Proceedings |
2022-23 |
2214-7853 |
https://journalinsights.elsevier.com/journals/2214-7853 |
https://www.sciencedirect.com/science/article/pii/S221478532202795X |
Scopus |
| 151 |
Fabrication of aluminium MMCs & associated difficulties–A review |
Prashant Vashishtha |
Mechanical Engineering |
Materials Today: Proceedings |
2022-23 |
2214-7853 |
https://journalinsights.elsevier.com/journals/2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322022465 |
Scopus |
| 152 |
Influence of process parameters of friction stir processing on the fabrication of metal foam |
Prashant Vashishtha |
Mechanical Engineering |
Materials Today: Proceedings |
2022-23 |
2214-7853 |
https://journalinsights.elsevier.com/journals/2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322027419 |
Scopus |
| 153 |
Problems encountered in underwater welding and remedies- a review |
Prashant Vashishtha |
Mechanical Engineering |
Materials Today: Proceedings |
2022-23 |
2214-7853 |
https://journalinsights.elsevier.com/journals/2214-7853 |
https://www.sciencedirect.com/science/article/pii/S221478532202795X |
Scopus |
| 154 |
Analysis of supply chain: An application of Taguchi method |
Rajesh Kumar Patel |
Mechanical Engineering |
materials today proceeding |
2022-23 |
#### |
https://doi.org/10.1016/j.matpr.2022.06.266 |
#### |
#### |
| 155 |
Effect on the mechanical properties due to hybridization of banana-fiber composites: A review |
Ranjeet Kumar |
Mechanical Engineering |
MaterialsToday
Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322025810 |
https://doi.org/10.1016/j.matpr.2022.04.436 |
SCOPUS |
| 156 |
Effect of drilling process parameters on delamination factor in drilling of pultruded glass fiber reinforced polymer composite |
Ranjeet Kumar |
Mechanical Engineering |
MaterialsToday
Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322022519 |
https://doi.org/10.1016/j.matpr.2022.04.110 |
SCOPUS |
| 157 |
Characterization of wear of FRP composites: A review |
Ranjeet Kumar |
Mechanical Engineering |
MaterialsToday
Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322023689 |
https://doi.org/10.1016/j.matpr.2022.04.236 |
SCOPUS |
| 158 |
A review of fatigue behavior of FRP composites |
Ranjeet Kumar |
Mechanical Engineering |
MaterialsToday
Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322021587 |
https://doi.org/10.1016/j.matpr.2022.04.034 |
SCOPUS |
| 159 |
A review on performance, combustion and emissions utilizing alternative fuels |
Ranjeet Kumar |
Mechanical Engineering |
MaterialsToday
Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322029480 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
SCOPUS |
| 160 |
Attempts to raise the solar still outcome: A short review |
Ranjeet Kumar |
Mechanical Engineering |
MaterialsToday
Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322022519 |
https://doi.org/10.1016/j.matpr.2022.04.477 |
SCOPUS |
| 161 |
Investigation of different parameters of cube printed using PLA by FDM 3D printer |
Rupesh Chalisgaonkar |
Mechanical Engineering |
Materials Today Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322020971 |
https://doi.org/10.1016/j.matpr.2022.03.700 |
SCOPUS |
| 162 |
Multi response assessment of EN19 alloy steel in CNC milling process using Fuzzy matter element methodology |
Rupesh Chalisgaonkar |
Mechanical Engineering |
Materials Today Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322021113 |
https://doi.org/10.1016/j.matpr.2022.03.713 |
SCOPUS |
| 163 |
Modelling of Indian vendors posture using rapid upper limb assessment (RULA) |
Rupesh Chalisgaonkar |
Mechanical Engineering |
Materials Today Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322021101 |
https://doi.org/10.1016/j.matpr.2022.03.712 |
SCOPUS |
| 164 |
Machine Learning Regression Approaches for Prediction Microhardness of Al-Y2O3 Composite |
Sachin Rathore |
Mechanical Engineering |
International Journal of Engineering Trends and Technology Volume 70 Issue 4, 303-315, April 2022 |
2022-23 |
ISSN: 2231 – 5381 |
https://doi.org/10.14445/22315381/IJETT-V70I4P227 |
https://doi.org/10.14445/22315381/IJETT-V70I4P227 |
SCOPUS |
| 165 |
Effect of drilling process parameters on delamination factor in drilling of pultruded glass fiber reinforced polymer composite |
Sandeep Chhabra |
Mechanical Engineering |
MaterialsToday: Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322022519 |
https://doi.org/10.1016/j.matpr.2022.04.110 |
SCOPUS |
| 166 |
A review on performance, combustion and emissions utilizing alternative fuels |
Sandeep Chhabra |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322029480 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
SCOPUS |
| 167 |
Attempts to raise the solar still outcome: A short review |
Sandeep Chhabra |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322022519 |
https://doi.org/10.1016/j.matpr.2022.04.477 |
SCOPUS |
| 168 |
Parametric optimization of traveling wire electrochemical discharge machining (TW-ECDM) process for aspect ratio during machining of borosilicate glass |
Sandeep Chhabra |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
1210-1214 |
https://www.sciencedirect.com/science/article/pii/S2214785322019496 |
https://doi.org/10.1016/j.matpr.2022.03.599 |
SCOPUS |
| 169 |
Study of utilization of hydrogen as fuel in internal combustion engine |
Sandeep Chhabra |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322020089 |
https://doi.org/10.1016/j.matpr.2022.03.660 |
SCOPUS |
| 170 |
Study on application of waste plastic in the construction industry |
Shwetabh singh |
Mechanical Engineering |
Materials Today: Proceedings |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.743 |
#### |
scopus |
| 171 |
Influence of process parameters of friction stir processing on the fabrication of metal foam |
Smriti Mishra |
Mechanical Engineering |
Materials today proceedings |
2022-23 |
2214-7853 |
Materials Today: Proceedings - Journal - Elsevier |
Influence of process parameters of friction stir processing on the fabrication of metal foam - ScienceDirect |
scopus |
| 172 |
Fabrication Of Aluminium MMCs & assosiated difficulties-A Review |
Smriti Mishra |
Mechanical Engineering |
Materials today proceedings |
2022-23 |
2214-7853 |
Materials Today: Proceedings - Journal - Elsevier |
Fabrication of aluminium MMCs & associated difficulties – A review - ScienceDirect |
scopus |
| 173 |
A REVIEW: SMART AGRICULTURE SYSTEM USING IOT |
Subodh Kumar Sharma |
Mechanical Engineering |
International Research Journal of Modernization in Engineering Technology and Science |
2022-23 |
2582-5208 |
www.irjmets.com |
#### |
#### |
| 174 |
An overview of software tools for the photovoltaic industry |
VINEET KUMAR VASHISHTHA |
Mechanical Engineering |
Elesivier |
2022-23 |
#### |
https://www.sciencedirect.com/science/article/pii/S2214785322029066 |
https://doi.org/10.1016/j.matpr.2022.04.737 |
SCOPUS |
| 175 |
Methods to enhance the productivity of solar still: A review |
VINEET KUMAR VASHISHTHA |
Mechanical Engineering |
Elesivier |
2022-23 |
#### |
https://www.sciencedirect.com/science/article/pii/S2214785322021368 |
https://doi.org/10.1016/j.matpr.2022.04.022 |
SCOPUS |
| 176 |
Attempts to raise the solar still outcome: A short review |
VINEET KUMAR VASHISHTHA |
Mechanical Engineering |
Elesivier |
2022-23 |
#### |
https://www.sciencedirect.com/science/article/pii/S2214785322026657 |
https://doi.org/10.1016/j.matpr.2022.04.477 |
SCOPUS |
| 177 |
Feasibility study of vertical axis wind turbine on UAE highways |
VINEET KUMAR VASHISHTHA |
Mechanical Engineering |
Elesivier |
2022-23 |
#### |
https://www.sciencedirect.com/science/article/pii/S221478532202689X |
https://doi.org/10.1016/j.matpr.2022.04.523 |
SCOPUS |
| 178 |
Comparative analysis of different barriers in downstream supply chain |
vivek kumar pathak |
Mechanical Engineering |
materials today proceeding |
2022-23 |
#### |
https://doi.org/10.1016/j.matpr.2022.05.462 |
https://doi.org/10.1016/j.matpr.2022.05.462 |
scopus |
| 179 |
Analysis of supply chain: An application of Taguchi method |
vivek kumar pathak |
Mechanical Engineering |
materials today proceeding |
2022-23 |
#### |
https://doi.org/10.1016/j.matpr.2022.06.266 |
#### |
#### |
| 180 |
Experimental Investigation on Micro-Electrical Discharge Machining process for heat treated Nickel-based Nimonic 80A |
Piyush Pant |
Mechanical Engineering |
Materials and Manufacturing Processes |
2022-23 |
Online ISSN: 1532-2475 , Print ISSN: 1042-6914 |
https://www.tandfonline.com/journals/lmmp20 |
https://doi.org/10.1080/10426914.2022.2105889 |
SCIE |
| 181 |
Analysis of Performance, Emission and combustion characteristics of a single cylinder VCR engine when run on blends of 1-octanol and Diesel |
Ashish Kumar Singh |
Mechanical Engineering |
Journal of Engg. Research |
2022-23 |
2307-1885 |
https://kuwaitjournals.org/jer/index.php/JER/ |
https://doi.org/10.36909/jer.ICCEMME |
SCIE |
| 182 |
Design of Customized Pneumatic Wheel |
Ashish Kumar Singh |
Mechanical Engineering |
International Journal of Scientific Research in Engineering and Management (IJSREM) |
2022-23 |
2582-3930 |
https://ijsrem.com/ |
https://ijsrem.com/download/design-of-customized-pnuematic-wheel/ |
UGC |
| 183 |
Modification in The Design of Two-Wheelers Helmets for Improved Comfort of Indian Riders |
SACHIN RATHORE |
Mechanical Engineering |
Journal of Engineering Research |
2022-23 |
2307-1885 |
DOI:10.36909/jer.ICAPIE.15031 |
DOI:10.36909/jer.ICAPIE.15031 |
SCI |
| 184 |
An Analytical Implementation of AHP in Supply Chain Working Environment |
NEERAJ KUMAR |
Mechanical Engineering |
Advances in Mechanical and Materials Technology |
2022-23 |
978-981-16-2794-1 |
Advances in Mechanical and Materials Technology | SpringerLink |
https://doi.org/10.1007/978-981-16-2794-1_85 |
LNME/SCI |
| 185 |
Modification in The Design of Two-Wheelers Helmets for Improved Comfort of Indian Riders |
Arunesh Chandra |
Mechanical Engineering |
Journal of Engineering Research |
2022-23 |
2307-1877 |
https://kuwaitjournals.org/jer/index.php/JER/home#:~:text=JER%20is%20published%20quarterly%20with,level%20learning%2C%20teaching%20and%20research. |
https://kuwaitjournals.org/jer/index.php/JER/article/view/15031 |
SCIE |
| 186 |
Modification In The Design And Development Of Tractor Trails For Onion Harvester |
Arunesh Chandra |
Mechanical Engineering |
SSRN |
2022-23 |
1556-5068 |
https://www.ssrn.com/index.cfm/en/ |
https://papers.ssrn.com/sol3/papers.cfm?abstract_id=4159613 |
Scopus |
| 187 |
DESIGN AND MATERIAL FOR A SOLAR STILL: A REVIEW |
Ashok Kumar |
Mechanical Engineering |
International Research Journal of Modernization in Engineering Technology and Science |
2022-23 |
2582-5208 |
https://www.irjmets.com/editorialboard.php |
https://www.irjmets.com/uploadedfiles/paper/issue_5_may_2022/24828/final/fin_irjmets1653905585.pdf |
UGC |
| 188 |
design and fabrication of push based box transport mechanism |
VIVEK KUMAR PATHAK |
Mechanical Engineering |
IJREET |
2022-23 |
2545-4523 |
https://8vk067.p3cdn1.secureserver.net/wp-content/uploads/2022/05/DESIGN-AND-FABRICATION-OF-PUSH-BASED-BOX-TRANSPORT-MECHANISM-1.pdf |
https://8vk067.p3cdn1.secureserver.net/wp-content/uploads/2022/05/DESIGN-AND-FABRICATION-OF-PUSH-BASED-BOX-TRANSPORT-MECHANISM-1.pdf |
UGC care |
| 189 |
STUDIES OF VARIOUS MECHANICAL PROPERTIES OF NANOMATERIAL
DEPOSITS ON STEEL BY THERMAL SPRAYING |
KUMARI ARCHAHA |
Mechanical Engineering |
International Research Journal of Modernization in Engineering Technology and Science |
2022-23 |
e-ISSN: 2582-5208 |
https://www.irjmets.com/ |
#### |
OTHER |
| 190 |
MECHANICAL PROPERTIES OF FRICTION STIR PROCESSED B4C/Gr-REINFORCED
HYBRID COMPOSITE FABRICATED THROUGH STIR CASTING METHOD |
Sachin Rathore |
Mechanical Engineering |
International Journal of Metalcasting |
2022-23 |
19395981 |
https://link.springer.com/article/10.1007/s40962-023-01078-7 |
https://link.springer.com/article/10.1007/s40962-023-01078-7 |
SCIE |
| 191 |
A novel technique for surface modification of aluminium alloy using GTAW |
Prashant Vashishtha |
Mechanical Engineering |
Journal of the Brazilian Society of Mechanical Sciences and Engineering |
2022-23 |
1806-3691 |
https://www.springer.com/journal/40430/ |
https://link.springer.com/article/10.1007/s40430-022-04000-0 |
SCIE |
| 192 |
Experimental Investigation of EN-31 Steel Using VMC |
Piyush Pant |
Mechanical Engineering |
International Journal of All Research Education and Scientific Methods |
2022-23 |
2455-6211 |
http://www.ijaresm.com/ |
https://doi.org/10.56025/IJARESM.2023.114231929 |
UGC APPROVED |
| 193 |
A novel technique for surface modification of aluminium alloy using GTAW |
Neha Bhadauria |
Mechanical Engineering |
Journal of the Brazilian Society of Mechanical Sciences and Engineering |
2022-23 |
1806-3691 |
https://www.springer.com/journal/40430/ |
https://link.springer.com/article/10.1007/s40430-022-04000-0 |
SCIE |
| 194 |
DESIGN OF THREE WHEELD CONFIGURATION VEHICLE |
Ashish Kumar Singh |
Mechanical Engineering |
INTERNATIONAL JOURNAL OF ALL RESEARCH EDUCATION AND SCIENTIFIC METHODS |
2022-23 |
2455-6211 |
#### |
This paper offers a thorough explanation of the design factors and analyses that go into creating a hybrid cycle. Three-cycle is propelled simultaneously by two people and a 600-Watt BLDC motor. It is a hybrid electric drive system-equipped vehicle that runs on human power. The emphasis has been put on design simplicity, great performance, simple conservation, and safety at genuinely affordable pricing. Most of the variables have been selected with simplicity and durability in consideration. We will design a vehicle that is ergonomic, aerodynamic, extensively engineered, and easily made in response to the recognition of demand. Two wheels are in the front while a third is in the back of the trike. |
UGC |
| 195 |
Optimisation of Machining Parameters for CNC Milling of FRP |
Arunesh Chandra |
Mechanical Engineering |
EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy |
2022-23 |
2432-5953(Online) |
https://www.tj.kyushu-u.ac.jp/evergreen/submit.php |
https://doi.org/10.5109/6792826 |
SCOPUS |
| 196 |
Review on Synthesis and Characterisation of Jute Reinforced Polymer Composite |
K L A Khan |
Mechanical Engineering |
International Journal of Scientific Research in Engineering and Management (IJSREM) |
2022-23 |
ISSN: 2582-3930 |
www.ijsrem.com |
DOI: 10.55041/IJSREM22430 |
NA |
| 197 |
Constitutive behaviour of a homogenized AT61 magnesium alloy under different strain rate and temperature: An experimental and numerical investigation |
Gaurav |
Mechanical Engineering |
Journal of Materials in Civil Engineering |
2022-23 |
1943-5533 |
https://ascelibrary.org/doi/abs/10.1061/JMCEE7.MTENG-15799 |
https://doi.org/10.1061/JMCEE7.MTENG-1579 |
SCI |
| 198 |
A comparative study of different constitutive models to predict the dynamic flow behaviour of a homogenised AT61 magnesium alloy |
Gaurav |
Mechanical Engineering |
Structures |
2022-23 |
2352-0124 |
https://www.sciencedirect.com/journal/structures |
https://doi.org/10.1016/j.istruc.2023.05.074 |
SCI |
| 199 |
The future of pharmacy: How AI is revolutionizing the industry |
Pratibha Kumari |
Mechanical Engineering |
Intelligent Pharmacy |
2022-23 |
2949-866X |
https://www.sciencedirect.com/journal/intelligent-pharmacy |
https://doi.org/10.1016/j.ipha.2023.04.008 |
SCOPUS |
| 200 |
Effect of strain path change on static Recrystallization behavior of AT63 magnesium alloy |
Gaurav |
Mechanical Engineering |
Journal of Materials: Design and Applications |
2022-23 |
20413076, 14644207 |
https://journals.sagepub.com/doi/abs/10.1177/14644207231170461 |
: 10.1177/14644207231170461 |
SCI |
| 201 |
A Novel Seal Design to Enhance MR Brake Performance |
Gaurav |
Mechanical Engineering |
Transactions of The Indian Institute of Metals |
2022-23 |
0972-2815 |
https://link.springer.com/journal/12666 |
https://doi.org/10.1007/s12666-022-02848-3 |
SCIE |
| 202 |
Robotics in Medical Field |
Sachin Rathore |
Mechanical Engineering |
Robotics in Medical Field |
2022-23 |
2395-5252 |
https://www.ijaem.net/current-issue.php?issueid=53&title=Robotics%20in%20Medical%20Field |
https://www.ijaem.net/current-issue.php?issueid=53&title=Robotics%20in%20Medical%20Field |
others |
| 203 |
Review of Thermoelectric Module |
Ankur Sachdeva |
Mechanical Engineering |
International Journal of Mechanical and Production Engineering |
2022-23 |
2320-2092, |
http://iraj.in/journal/IJMPE/aboutus.php |
https://iraj.doionline.org/dx/IJMPE-IRAJ-DOIONLINE-19910 |
Publons(Web of Science Group |
| 204 |
Finite element modeling of quartz material for analyzing material removal rate in ECDM process |
Anurag Gupta |
Mechanical Engineering |
International Journal on Interactive Design and Manufacturing (IJIDeM) |
2022-23 |
1955-2513 |
https://www.springer.com/journal/12008 |
https://doi.org/10.1007/s12008-022-01037-2 |
scopus |
| 205 |
Optimisation of Machining Parameters for CNC Milling of Fibre Reinforced Polymers |
Abhishek Yadav |
Mechanical Engineering |
EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy |
2022-23 |
2432-5953 |
https://www.tj.kyushu-u.ac.jp/evergreen/ |
https://catalog.lib.kyushu-u.ac.jp/opac_detail_md/?lang=1&amode=MD100000&bibid=6792826 |
SCOPUS |
| 206 |
An Experimental Analysis of Natural Heat Transfer between Rectangular Solid and Perforated Fins Having Different Perforation Characteristics |
Abhishek Yadav |
Mechanical Engineering |
EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy |
2022-23 |
2432-5953 |
https://www.tj.kyushu-u.ac.jp/evergreen/ |
https://catalog.lib.kyushu-u.ac.jp/opac_detail_md/?lang=1&amode=MD100000&bibid=6781094 |
Scopus |
| 207 |
Ranking and Execution the critical success factors liable for price of quality using fuzzy topsis in friction allied industries in India |
Neeraj Kumar |
Mechanical Engineering |
Journal of southwest jiaotong university |
2022-23 |
0258-2724 |
https://jsju.org.cn/index.php |
#### |
SCOPUS |
